Step 1 - Thermotherapy and ionic cleaning: Press the button to turn on the yellow light. After cleaning the skin, use the metallic tip of the device on damp skin to gently massage the most congested areas. The increased temperature will facilitate cleaning, while the positively charged ions attract the negatively charged dirt to the surface of the skin, preparing it for extraction. After 2 minutes, the device will emit a buzzing sound indicating that step 1 is complete and the device has shut down.
Step 2 - Thermotherapy and ultrasonic vibration: Press the button to turn on the blue light. Use the metallic tip of the device on damp skin to gently massage the most congested areas. This step uses ultrasonic vibrations and heat to manipulate the skin and further soften clogged pores. After 2 minutes, the device will emit a buzzing sound indicating that step 2 is complete and the device has shut down.
Step 3 - Extraction: Press the button to turn on the white light. Place the suction nozzle at the end opposite the metallized tip. Start extraction at level 1 and glide over the skin in continuous upward movements (without ever stopping in an area). You can increase the potency up to level 3 (this level is not recommended for the face, only the body). Do not slide more than once on each skin area to avoid unnecessary irritation. The suction lasts for a maximum of 1 minute and automatically turns off, but you can use less time by manually turning off the device. Finally, wash the extraction nozzle with soap and water.
Precautions: The extraction nozzle must be continuously slid over the skin, never focus suction on a single area of the skin, as this can cause bruising. Do not use the device under water as it is not waterproof. Use only 1 time a week.
Battery: If the red light flashes 3 times, it means the battery is low and the device will turn off. Charge with USB
For whom: All skin types, except sensitive skin, with visible capillaries and redness or rosacea.
